1974 Citizen Chronograph Print


One lucky find was this page from Auto Motor Sport magazine from 1974.

It says “Citizen Chronograph Automatic” and “A lot of precision for the money (at this price)”. So, we have a racing automatic chronograph that is not too expensive and still very precise. The race on! These are the designs that were used at the time. My favorites are not here (The Walter Wolf and the Octagon bullhead).

On the other side of the page we have a red Ferrari Testa Rossa. 😉

Enjoy the print!

Citizen chronograph automatic

The watches wit only one sub-dial are powered by Citizen calibre 8100A  and the others (with 2 sub-dials) by Citizen calibre 8110A

The next models are represented, with their prices in DM at the time (year 1974).

  1. 67-9011 (DM 355)
  2. 67-9631 (DM 298)
  3. 67-9577 (DM 278)
  4. 67-9038 (DM 325)
  5. 67-9071 (DM 348)

Read more about Vintage Citizen Chronographs here:

https://vintagecitizenwatches.com/chronograph-vcw/

Citizen 8100 Chronograph 67-9151 Restoration


One of my favorite Citizen chronographs is the 67-9151 model. I wrote before about a custom project based on this model HERE.

This time I will write about the all original one.

The watch was found in a bad shape, really scratched and dirty.  But even underneath that scratched crystal there could be easily observed the beautiful original green dial. For this model there are available only three dial variations, as seen in the catalog picture below.  The caseback was never removed in the past 30 years. The movement stopped a long time ago and the pushers were not moving.

citizen-67-9151

The restoration process started by removing the caseback and the dedicated bracelet. The design of the stainless steel bracelet fits the  octagonal watch case perfectly being made for this model only. After removing the bracelet and the clasp, it was time for the movement to come out.

The calibre 8110A was serviced and now it is running strongly, as it should. It is a flyback mechanism and features a day – date complication too. It is an automatic movement,  with 23 jewls and hand winding capability. It was produced by Citizen starting from 1972. It is a vertical clutch chronograph (beating at 28.800 bph) with column wheel and fly back function. The fly back function means that you can reset the chronograph while in motion and it will start again without needing to go the entire process of pressing stop-reset-start. So, one push can do all of this. A particularity for this movement is that when you want to change the day you should pull the crown to second position (for changing the date) and push and release the reset (1 o’clock) button.  The column wheel/vertical clutch design of the movement advices to leave the chronograph running for most of the time (this way you can also see the beautiful sweeping central second hand in movement), but from time to time it should be stopped.

citizen 67-9151 chrono

The dial is the main attraction of the watch, and that says something about it. The overall sharp, angular shape of the watch is mirrored in the mesmerising details. The green color is not plain at all but lighter and shinier in the centre and darker at the 3 and 9 sides. The chronograph sub-dials are hexagonal with 3 variations: yellow-white, yellow-orange and all yellow.  The seconds hand for the all yellow version is yellow too while for the other two is orange.

vintage citizen chronograph 8110

At the end of the restoration we have a newly brushed/polished strap and case, fully functional movement, and a new mineral crystal. What a beautiful watch!

Read more about Citizen chronographs on this page:

https://vintagecitizenwatches.com/chronograph-vcw/

Citizen Chronograph CUSTOM PROJECT – calibre 8110A


CUSTOM PROJECT WATCH

This is the most common vintage automatic Citizen chronograph movement in one of the rarest case design, with one of my favorite Citizen bracelet. The reference number on the caseback is Citizen 67-9151. Due to the lack of information regarding vintage Citizen watches, sometimes we get some watches that are actually Custom Project watches (marriage watches, or just plain fakes). Sometimes the strap doesn’t belong to the watch or the case is not from the same model with the dial. This doesn’t mean the end result is not a beautiful watch but is not true to the original model. Such a watch is this one, a watch made by a watch collector, a vintage Citizen lover who tried to create the best Citizen he could. All the parts are original Citizen.  Regarding the shape, you can instantly see that this is not like all the other chronographs. This one has a beautiful octagonal shape that gives it personality, masculinity and a lot of style.

Citizen automatic chronograph 8110A The case is made of brushed and polished stainless steel and the case back screws into place, model Citizen 67-9151. The round bezel is polished and the glass crystal is flat. The shape of the watch is octagonal. The winding crown is signed “CTZ”. The case alone has different surfaces, not counting the bezel, crown and buttons so the visual effect of brushed and polished surfaces, with a lot of angles, gives a powerful feeling.

The dial is classic, with two contrasting subdials positioned at 12 and 6. A lot of “restorations” are with aftermarket dials, so pay attention on this aspect when thinking of buying a Citizen chronograph. The subdial at 6 counts the elapsed minutes (30), the one at 12 – the hours(12) and for the seconds we have the red central sweeping hand. The day is in two languages (German and English) and Sundays are painted red. On the outside of the dial we have the classic tachymeter scale.

Vintage Citizen Flyback Chronograph 67-9151 calibre 8110A The movement is the Citizen automatic, 23 jewls, calibre 8110A with hand winding capability. It was produced by Citizen starting from 1972. It is a vertical clutch chronograph (beating at 28.800 bph) with column wheel and fly back function. (how many modern chronograph do that, and what is their cost?) Lets don’t forget it has a day and date indicator. The fly back function means that you can reset the chronograph while in motion and it will start again without needing to go the entire process of pressing stop-reset-start. So, one push can do all of this. Of course that if you want to stop it you can go the classic stop-reset way. A particularity for this movement is that when you want to change the day you should pull the crown to second position (for changing the date) and push and release the reset (1 o’clock) button. It is 27 mm wide and 6.9mm high. The column wheel/vertical clutch design of the movement advices to leave the chronograph running for most of the time (this way you can also see the beautiful sweeping central second hand in movement), but from time to time it should be stopped. This is a chronograph that needs to be used. It is not made for design purpose but for timing.

The bracelet is one of my top favorite design from Citizen is stainless steel, wider where it connects with the case and narrowing towards the signed “Citizen” stainless steel clasp. The links are made of solid pieces, not folded.

Conclusion: Beautiful to wear, beautiful to look at, interesting special design, wonderful automatic fly back chronograph movement that needs to be used… what else to ask for a chronograph? Don’t forget to pay a lot of attention when buying your Vintage Citizen Chronograph! A lot of them are beautiful but not original!

Here is a link where you can see a video of this watch:

https://vintagecitizenwatches.com/2014/04/22/vintage-citizen-chronograph-calibre-8110a-67-9151/

 

Vintage Citizen chronograph calibre 8110A 67-9151


Just a short video of a custom made vintage automatic chronograph.

Enjoy!

 

How to spot a Fake dial – Citizen Bullhead 67-9356


One of the most replicated (so called “aftermarket”) dials for vintage Citizen watches is the dial for the wellknown “bullhead” chronograph. The original bullhead dial, the one with an octagonal SS case is either black with white sub-dials or white with black sub-dials. If you see one with a different color, for sure, it is not original. Sometimes you can find one that looks just the way it should, but let’s wait a minute. Let’t put on the magnifier and compare the original dial with the fake one.

I have posted two photos. The fake dial is the one where you can see the entire watch, on the left,  all the details are from an original dial, on the right. Click on the pictures1 to magnify them.

In the first picture we can clearly see:

Citizen Bullhead fake aftermarket dial

1 – the “500” is not where is supposed to be on the fake one. It is miss-placed at the 38th marker, not at the 36th, as it should be.

2 – the “TACHYMETER” writing on the aftermarket one is too long (this is why the “500” is misplaced too) and the second “T” on the fake one is after the 1 o’clock hour marker as for the real one the “T” is before the hour marker.

3 – the applied hour markers should have two levels, on the lower level is the luminous dot. On the fake dial the hour marker is flat, without this particularity.

4 – the markings are not correct on the fake one

5 – the sub-dials (minute and hours) should be carefully made (with a nice concentric pattern) and nor shiny

6 – The tachymeter scale numbers are not allowed to touch the other lines printed on the dial. The execution lack finesse at the fake dial.

The second picture: 

Original dial for Citizen Bullhead and fake aftermarket dial

1 – the “Chronograph” and “automatic” are better centered at the original part

2 – the applied “Citizen” logo has better quality on the real dial

3 – there should be more space between the “Chronograph” and “Automatic” on the original

4 – the overall printing is way better at the original Citizen dial and a direct comparison under magnification will make it all crystal clear

For sure there are other mistakes too but these are the obvious ones.

As a conclusion, I suggest that any buyer and Vintage Citizen Collector should take it’s time (and the magnification) and not waste all this money on fake watches. Remember that “Aftermarket” means “Fake”. 

read more about this chronograph watch  here:

https://vintagecitizenwatches.com/2013/12/24/citizen-bullhead-chronograph-67-9356/

VIDEO – Citizen Recordmaster Chronograph 63-0110


The only hand winding vintage Citizen movement is the calibre 5702. This movement is found in the Recordmaster, the watch presented in the video. Wonderful piece, with fly back mechanism.

Read the full article about this particular watch here:

https://vintagecitizenwatches.com/2014/02/23/citizen-recordmaster-chronograph-63-0110/

Read more about vintage Citizen (manual and automatic) chronographs here:

https://vintagecitizenwatches.com/chronograph-vcw/

Enjoy! 🙂

Citizen Recordmaster Sportsmaster Chronograph


Looking back at 1970 I see a world that started focusing it’s attention on automatic chronographs while at almost the same time, the quartz revolution is about to play it’s role, somehow stopping, or at least slowing down, the mechanical movement development.  This Citizen model was introduced in 1967 and was produced for only 5 years.

The Recordmaster is a beautiful piece, a real column wheel flyback chronograph, with a hand winding movement. It counts only up to one minute elapsed time but in such a memorable way!

citizen recordmaster 63-0110

The case is classic, made in stainless steel, 36 mm wide. It has an elegant case, entirely polished. The winding crown is signed “CTZ” and the pushers are polished too. There is a nicely chamfer edge that add further beauty to the overall design, very elegant and yet a real sport chronograph. The caseback is polished with the usual markings (parawater as it was made prior to ’73). The acrylic crystal sits above the case and has a flat surface. I love the way it bend the light at the edges!

The dial is absolutely stunning! Plain black, with simple applied polished hour markers. The hands are polished too. There is an inner tachymeter for calculating speed. The writing is simple, white. Beautiful contrast white on black.  It looks like chalk writing on a blackboard. The date wheel is white with black numerals. There is also luminous material that, 40 years later, is in wonderful condition. There is one more dial color version that is white with black writing. (I added pics of the white dial model, found on internet – rakuten)

citizen recordmasterThe movement is Citizen calibre 5702 with 21 jewels. It beats at a slow rate, half the speed of the fastest Citizen Leopard movements, at 18,000bph.  It is the first chronograph and the only hand winding chronograph movement that Citizen produced. There is also an automatic one with a two variations: 8100A and 8110A. All of the Citizen chronograph movements are flyback and so is this one. The date is not quick set but changing by advancing the hour hand.

The bracelet is original to this model (most of the Recordmaster I have seen are on replacement straps). Not much to say about it. It has a combination of polished and brushed surfaces, a signed sandblasted clasp and perfectly fitted end links. It is tapering starting from the case towards the stainless steel clasp.citizen recordmaster chronograph 63-0110Update: A few more versions I found (some of them are my pictures, some are from online sellers and fellow Citizen collectors) are these:

1 – Black dial, red chronograph hand.

recordmaster citizen watch

2 – Black dial with the tachymeter scale starting from 1000, black hands and a white, square luminous tip, chronograph hand. Reference 4-570091T Citizen Recordmaster recordmaster citizen black hands

3 – The first version made is the following one (see the details on the caseback):first black citizen recordmaster

4- A special case design, with the original bracelet, white dial Citizen Recordmaster:white dial citizen recordmaster vintage

5 – A rare Kyoto Recordmaster (the only one I saw and also had) version, made for French market:

citizen kyoto recordmaster

Here is the awesome Recordmaster collection of my friend John from Australia:

Update Nov 2017 – Citizen Museum in Tokyo has one on display that has the “Sportsmaster” dial print rather than the Recordmaster.

Conclusion: Beautiful, timeless design. A rare piece that has its specific place in any Vintage Citizen Watch collection. This is the perfect combination of simplicity combining in perfect harmony elegance and sportiveness that (as far as I know so far) came in 4 dial variants plus the additional different RallyCustom one – read about it HERE.

For the VIDEO of this watch visit:

https://vintagecitizenwatches.com/2014/03/12/video-citizen-recordmaster-chronograph-63-0110-2/

Read more about automatic Vintage Citizen Chronographs here:

https://vintagecitizenwatches.com/chronograph-vcw/

Looking for the “Holly Grail” watch


What’s that The “Grail” watch? 

The holly grail watch

Well… it is the watch that rumor has it that exists but can not be found. You look for it years after years and from time to time you think you find it, but than you realize it was not THE one, but only some pale imitation. You look for it again and again and again. Sometimes you dream about it, sometimes you think you see it strapped to someones wrist but time after time you find out it was just a mind trick. Your eyes see only what your mind fantasizes about.

One glorious night, after hours on web searches, you find a post with pictures attached to a post in a language you don’t understand. That is the real watch! It exists!

Your heart stops; than it races like crazy! With trembling fingers you press the keys on your laptop and start writing a message to the user that posted the pictures, hoping for an answer…

Maybe… Maybe… Should you allow your heart to hope for an answer?

(feb 2014) Let us pray for THE Holly Grail!

UPDATE (oct 2014) I found not one but two owners of this model. One owner doesn’t sell it (yet) and I am still waiting for an answer from the second one. I hope he still has it and will sell it to me. 🙂 Well.. he is not selling it. 😦 The search is still on.

UPDATE (jan 2015) The wait is long, too long! Is it fate? Is it a coincidence? I have to wait! Meanwhile I found out that the two watches I told you about in Oct are not 100% original. Both of them have aftermarket bezels and bezel inserts, and one has a non original crown too. They don’t have the original strap. (one does actually) The closer I get the longer and more difficult the wait gets! It’s been one year since I wrote this article and I feel…

UPDATE (feb 2015) The hunt is over! I have it in my hands! Tired and extremely happy! Read abut THE Citizen HERE!

Thank you all! 🙂

 

 

VCW Facebook group page


Facebook is a great place to meat great people with really great watches. 🙂 This is why we have created the Vintage Citizen Watches official group page. Check it out and add yourself and your friends! Here it is: https://www.facebook.com/groups/vintagecitizenwatches/354822734656228/?comment_id=354922047979630&notif_t=like citizen facebookThank you for looking!

VIDEO – Citizen automatic chronograph 67-9631 cal. 8100A


This is one of the two vintage automatic chronograph movements made by Citizen, the other is the Citizen 8110A calibre that features an extra 12 hours counter.

A video of 8110A is here:

https://vintagecitizenwatches.com/2014/01/13/video-citizen-bullhead-chronograph-model-67-9356-2/

And here is the video for 67-9631, calibre 8100A. You can see the start-stop-reset mechanism in function, as well as the fly back. Also you can see the way you can change the date and the day. Enjoy!

More informations about this watch here:

https://vintagecitizenwatches.com/2014/01/05/citizen-automatic-chronograph-67-9631/