Uncategorized

by

Vintage ladies Citizen watch 64-4838


It is time for a ladies Citizen watch! 

Another NOS watch, ready for wearing, 40 years after it’s birth date. (it was made in July 1972). I wonder why did it take so long for such a beautiful watch to enhance the beauty of a woman’s wrist? Maybe it waited for the right owner?

vintage Citizen ladies watch 64-4838

The case is rather a small cushion shaped one, made in stainless steel, with a snap on, flat, brushed caseback. It has integrated lugs, with a brushed frontal surface.  The sides are polished. The acrylic crystal is flat, but sitting higher than the case. I love the way it gives warmth to the entire watch. The silver metallic overall appearance needed something soft, as the case design and the worm acrylic crystal for counterbalance. The crown is signed “CTZ” as expected. Another feature I like about this watch is the fact that it is Parawater (read about it here: https://vintagecitizenwatches.com/2013/12/26/citizen-parawater-citizen-parashock/ )

The dial is silver, simple yet elegant, with applied polished hour markers, Citizen logo and date frame. Each hour is also marked with a luminous dot (except for the one at 3 o’clock where the date is). The hour markers are “T” shaped in sectional view. The 3 hands, with a sweeping second hand, are polished and the hour and minute hands have luminous material that is very bright after 40 years. The writing is black, thin, reading “automatic” and “28800 21 jewels”. The entire dial has a brushed pattern in the same direction as the case, caseback and bracelet.  

vintage Citizen ladies watch 64-4838The movement is an automatic with hand winding capability, Citizen calibre 6900. It has a power reserve at about 38 hours, beating at 28800 bph. The date can be changed in an interesting way, by pulling the crown. It is a quickset mechanism. With the crown in time setting position pulling and releasing the crown will advance the date by one day. Each pull is one day.

The bracelet is stainless steel, with full links and connectors made from folded steel. It is tapering from the case towards the clasp. The clasp is also signed, longitudinally “citizen”. The entire bracelet is brushed except the clasp that is satined with polished sides. The sides and underside ot the bracelet is also polished.

Citizen vintage ladies automatic watch

Conclusion: Such a beautiful watch! So elegant, so delicate, so understated! One of the last years (maybe the last) of “Parawater”.  Maybe it looks nice and it is a beautiful jewelry but also a well made timepiece.

by

Citizen automatic chronograph 67-9631


Citizen had two automatic calibres.

One automatic chronograph is the 8110A and you can read about the “octagon bullhead” that had this movement here:

https://vintagecitizenwatches.com/2013/12/24/citizen-bullhead-chronograph-67-9356/

And the other one is the one I will write about now, the 8100A.

Both of them came with different case design, shapes and sizes with a lot of dials. This is why sometimes is difficult to identify if a certain watch is correct or “reconditioned” with aftermarket parts.

vintage citizen automatic chronograph 8100

This is a one sub-dial design chronograph featuring a lot of interesting details. It was made in November 1973.

The case is made of brushed and polished stainless steel. The chronograph pushers are on the side, where the winding crown is. It is a cushion shape with a circular grain brushed front surface (I have seen a sunburst grain also, and polished – the polished is for sure not correct) and polished everywhere else. The caseback is screw in with a circular brushed flat surface. The crown is signed “CTZ”. The mineral crystal sits a little bit taller than the case, with chamfer edge. Nothing out of the ordinary, jut a simple, normal ’70’s design by Citizen, 38mm wide without the crown.

The dial is blue with orange and silver accents. It is nothing less but gorgeous! The blue changes from dark blue (almost black sometimes) to bright blue and then to a type of green really difficult to picture. Sometimes it seems unreal. You have to see one in real life in order to fully appreciate the beauty of this one. On 6 it is the sub-dial, counting the elapsed (30) minutes. This is the only sub-dial (normal for cal 8100A). The central, orange central sweeping hand counts the seconds. This sub-dial is silver with highlighted 5 minutes periods. The 5-10 minutes is blue. Not only the chronograph hands are orange but also the current time hands are painted (not entirely) orange and they have a luminous line. On 3 o’clock there are the day and the date windows, with a silver painted frame. The days and the dates are printed on black disks. The polished Citizen logo is applied and so are the hour markers. The hour markers have an orange central line ending with a luminous dot. On the outer side of the dial there is a white Tachymeter scale, for racing, you know!

Screen Shot 2014-03-16 at 11.28.56

The movement is the Citizen automatic, 23 jewls,  calibre 8100A with hand winding capability. It was produced by Citizen starting from 1972, just as 8110A. It is a vertical clutch chronograph (beating at 28.800 bph) with column wheel and fly back function. It also features a day and date indicator. The fly back function means that you can reset the chronograph while in motion and it will start again without needing to go the entire process of pressing stop-reset-start. So, one push can do all of this. Of course  that if you want to stop it you can go the classic stop-reset way. A particularity for this movement is that when you want to change the day you should pull the crown to second position (for changing the date) and push and release the reset (5 o’clock) button. It is 27 mm wide and 5,8mm high, (1mm less than 8110A). The column wheel/vertical clutch design of the movement advices to leave the chronograph running for most of the time (this way you can also see the beautiful sweeping central second hand in movement), but from time to time it should be stopped. This is a chronograph that needs to be used. It is not made for design purpose but for timing.

The bracelet is an usual one piece link design, made by Citizen, with a brushed surface that suits the watch perfectly. It is made in stainless steel with a signed “Citizen” clasp. As usual, Citizen bracelets are very comfortable with a lot of adjustments so finding the perfect fit is easy. 

vintage citizen chronograph 8100a

Conclusion: Wonderful Citizen chronograph, vintage yet so modern, with a nice wrist presence and amazing dial!

Enjoy the video of this watch here:

https://vintagecitizenwatches.com/2014/01/25/video-citizen-automatic-chronograph-67-9631-cal-8100a/