Adam’s great story of Citizen Chronometer


Adam is a great guy from Australia with a great watch story to share. Without further ado I will let him tell you all about it! 🙂

“So…about the watch. I didn’t wear it to my wedding as the wedding was in Sydney 4 hours drive from here (Port Macquarie) followed by a honeymoon in Melbourne. I did not want to lose it.

We had an amazing wedding staying in Sydney, then in Melbourne.

I never had the chance to get the watch serviced before the wedding as I was very busy.
When I was 10 years old I stayed with my Aunty and Uncle for a week. They live on acreage in a small village one hundred and sixty kilometres west of Sydney called Old Bowenfels. My uncle Karl was an elderly man who worked as an electrician for his entire working life.

As Australia was isolated when he was younger he had to be innovative or creative to enjoy modern technology. He built a television set using a radar screen, a valve radio, and a device that could record voices or sounds onto vinyl. He recorded my great, great grand parents singing Silent Night in English and in Danish.

He was an amazing man who still maintained the property into his mid eighties cutting wood and loading coal into the “Donkey” (a very, very old hot water system). He was very resourceful and refused to replace things that still work, if it failed he would repair it.

When I found the watch it was sitting on a shelf covered in dust and dirt. The watch had been sitting there so long that the leather band had dried out and gone solid. The watch must have had a pretty hard life as what you saw in the photos. I asked him if I could have it and being a generous man he said yes without a second thought. I took the watch home with me and always held it in high regard. He passed away two years ago after a long battle with asbestosis and dementia. Knowing he was unwell for a long time it was hard for me as I have never really grieved his passing or even cried.

I think of my uncle often because he was like a grandfather to me. I spent a great deal of time on their property and was very close to my uncle. He taught me to weld, basic electronics and like I said also served as a grandfather figure.
That is why I hold this watch in high regard because when I hold it, it reminds me of my childhood and of my time spend with my uncle.

I also feel guilty about the watch at the same time as my Uncle became estranged from his eldest son for a very long time, his grandchildren did not want to see him or my aunt as they felt that they were boring. At the funeral I sat near the front of the church. It was very awkward as my third cousins, his grand children were devastated at losing Karl. I think it was because they were sad for the time lost that they could have spent with him.

So now the watch sits in a watch case with many other watches that I like. I never wear it because I don’t feel comfortable with the idea of wearing it but also I like keeping the watch as it represents the time that I have spent with my Aunty and Uncle. It is something that is very special to me.”

citizen chronometer officialy certified

Thank you Adam! I am sure the readers of Vintage Citizen Watches loved the story just as much as I did! Many times the watches are a lot more than time telling devices and they have great value due to our emmotional connections and the stories they tell about our past, about our loved ones, about our memories.  

A few words about the watch: Citizen had a line of hi beat (36,000 bph) called Leopard. Adams watch was the top of the Leopard. They had their own logo and medallion as seen on the screw in caseback.  The case is gold plated, with a stainless steel caseback and a gold inlay medallion. All were 36,000 bph and most were made with 28 jewels, but there were also 31 and 32 jewels models. Adam’s watch has 31 jewels. These use the 7250 movement (7230 in the 28 jewel ones).

Read more about another beautiful Citizen Leopard here: https://vintagecitizenwatches.com/2014/11/22/citizen-leopard-36000/

And another special Citizen Chronometer Officially Certified HERE.

Advertisement

Citizen Leopard 36000 – model 67-2050


When you say the word Leopard next to Citizen you know this is a special one. 

Why is is special? Read on and see. 🙂

citizen leopard

The first thing you notice when holding the watch is the beautiful mesh stainless steel bracelet that fits the case as a high end modern watch would. The case is stainless steel too and has an interesting oval shape, with integrated lugs. The bezel is polished and so is the entire case except for the frontal surface that has a radial brushed finish. The crown is simple, signed CTZ. Another detail is discovered when seeing the watch from the side: a beautiful arched shape, following the wrist of the lucky wearer.

The dial, seen through the oval mineral crystal, is grey-blue, sometimes more one or the other depending on the light, and very elegant. The hour indexes are applied and so is the day date window frame. The hour and minute hands are dark grey and the seconds hand is white. Why is it white? Because the second hand is special. It is special because on the dial except for the applied logo Citizen and Automatic at 12, at 6 it is written 36000, Leopard, 28 jewels. And this says something about the movement. 🙂

citizen leopard copy

The calibre inside is the Citizen hi-beat parashock 7230, running at 36000 bph.  It has 28 jewels and a beautiful white sweeping central second hand that hacks, it can be winded by hand also and has a quickset date feature. The day is set by advancing the hour hand pass midnight.

A beautiful elegant watch and I consider myself to be very fortunate to have found this time capsule in a NOS state, even though it is made on April 1974.

later edit: I found the watch in the next picture on yahoo japan so the pictures are not mine but belong to the seller. This is the first solid Gold superbeat 10 Leopard I see. There are also a few models in stainless steel and some gold plated Leopards too, but this is the first I see in solid gold. Needless to say it is in perfect condition. The selling price is JPY 350,000.

gold citizen leopard

Here is a scan made by me of the Citizen calibre 72xx from a vintage Citizen catalogue. I hope it helps understanding a little better the inside of these beautiful watches.

Citizen leopard calibre 7200 36000

Read more about a vintage Citizen Leopard POCKET WATCH here: 

https://vintagecitizenwatches.com/2014/02/10/citizen-leopard-36000-pocket-watch-67-2192/

And read about The 28800 Citizen Leopard here:

https://vintagecitizenwatches.com/2015/01/17/citizen-leopard-28800-4-720032ta/