automatic

by

Citizen ladies diver 150m model 54-0919


Every man needs a real diver watch, and every woman (either a girlfriend or a wife of a true watch enthusiast) is going to get one eventually. 🙂 

This is the vintage Citizen ladies diver. This is the ultimate one, the real one.

vintage ladies Citizen diverThis model has all the specifications that define a diver. My better half says it is even better than the men model of the same time frame, witch is the 52-0110 presented in the picture. I tend to agree with her (well, I have no choice but to agree with her 🙂 ). Read about my watch here: https://vintagecitizenwatches.com/2013/12/24/citizen-automatic-diver-150m-52-0110/ Mine was made in 1978 and hers in 1980.

The case is small,  made in polished stainless steel but with a brushed face that doesn’t reflect light the same way as a polished surface would. This is mandatory for a diver so the time can be easily read without light interference. Compared to the men model, this one has some other elements that gives it a nice diving touch: crown guards, lug holes (for easily changing the strap) and unidirectional rotating bezel (60 clicks). By contrast, the big brother has only a friction type bidirectional bezel, no crown guards and no lug holes.  The water resistance is similar (150m) and both of them have a large screw-in crown, an easy grip bezel with a beautiful aluminum insert and a thick flat mineral crystal. The underside of the crystal is concave, magnifying the hands and the dial.

The dial and the hands are very similar. Both the ladies watch and the men watch have a black dial with applied luminous hour markers. The hands are similar (Mercedes hours hand, spade minutes hand and a seconds hand with a luminous dot close to the tip). The small brother has a day and date window. Both of them are marked in the same way: Citizen, automatic, 21 jewels, water resistant, 150m. My girlfriend’s watch has a raised ring part of the dial with seconds markers. That gives a great depth feeling to the entire watch face.

Citizen ladies diver 150m model 54-0919The movement is small too, suited for the small case. It is an automatic, 21 jewels movement. Citizen named it calibre 6601, and can be found in a variety of ladies watches. Not much to say about it except the fact that it displays both the day and the date, can be hand wound and a particularity is the fact the date changes by pulling repeatedly the crown.

The strap is the original (pretty impressive for a 30 years old watch), mint condition rubber, with a stainless steel buckle. It is very comfortable, very easy to find the perfect adjustment hole. The width at the lugs end is 14 mm, but it integrates really well with the flowing case design. I think it would look good on nato (still looking for one so small) and i have already ordered a mesh stainless steel bracelet for it.

Citizen ladies diver 150m model 54-0919 citizen 150m

As a conclusion, all I can say that my diving watch found it’s better half and so did I. 🙂

Read more about vintage Citizen divers here:

https://vintagecitizenwatches.com/diver-vcw/

by

Citizen Seven Star Deluxe “Monthly” model ACSS-52704-Y


This is a nice full calendar Citizen, powered by a simple movement. Even though it looks like the month display is a complex feature, it is only a simple and clever internal bezel.  Due to this particularity (month display) it was named “Monthly” but another similar model is called “Moon – Dater”.  The reason for a this (one model with two names) is the fact that the “Moon -Dater” might have been designated for export.

citizen seven star deluxe monthly

The case is, as most of the times, made is stainless steel, with mirror polished flat sides and deep sunburst frontal surface. It has a cushion style shape with integrated lugs. The bezel holding the flat mineral crystal is polished and so is the stainless steel caseback. My watch is the black face one, while the credit for the pictures of the white one goes to an internet seller. Both of them are in perfect condition and the different surfaces can be easily admired mostly because of it’s generous proportions, being rather large. It has two crowns, one at 3 o’clock connected to the mechanism and one at 2 o’clock for easily setting the month. It is marked “Para water” (it is made in 1969, prior to the unfortunate term change in 1973 to international “water resistant”)

The dial is dark deep black, without reflections. The white one is as in the pictures. I didn’t have the chance to hold it and take a closer look. The hour markers are applied and polished. The “7” logo and the “Citizen” logo are applied in a similar manner. In the same way the hands and the day-date window frame are also polished. There is a second part of the dial, a raised internal minute disk that features the month window. All the disks (day, date , month) are white with black lettering (sundays are red). For the white dialed one the day is positioned at 9. There is also a version with a pink month disk (the Moon Dater?) I like the crosshair detail and the white lettering resembling white chalk writing on a blackboard on the black one.

citizen monthly seven star acss52704-y

The movement is the automatic Citizen calibre 5270, with 21 jewels beating at 18,000 beat per hour, with quickset date.  Some models have a 23 jewels movement. It is a reliable movement used in a variety of models displaying day and date. It offers hand winding possibility too. The date changes in the second position of the winding crown (first position for winding, third for time setting) but the day changes only by passing midnight with the hands. The operating crown for the movement is the one at 3. Even though it seams that the month display is operated by the movement, it does not. In fact it is an internal bezel that should be adjusted by the crown at 2 o’clock.

The bracelet for the black one (nor sure if it is the proper one for the model)  is tapering and closing with a signed clasp. The interesting part of the signature is the fact that is longitudinally placed along the clasp. Not too much to say about it, only a brushed bracelet that in my opinion suits the watch very well.The white one is on a mesh bracelet (not sure if original for the model).

All things considered, this is a simple, interesting watch, with a clever way of displaying the month. So, here we have a full calendar vintage Citizen.

Read about the older version, more complex, full calendar Citizen watch HERE

by

Citizen compressor diver – Seven Star 4-520017Y


Let me introduce to you a beautiful, NOS, vintage compressor style diver that has just the right amount of pure class.

A compressor case is defined by the fact that the rotating bezel is inside the case, under the crystal and it is turned by one of the crowns, rather than directly by hand. Gary, a reader, provided a piece of information about Compressor cases that I would love to share with you:

“These are beautful watches and I enjoyed reading about them but I must correct your assumption that they are compressor watches. Its a common misconception that if a watch has two crowns and an internal bezel, it must be a supercompressor but infact Compressor and Super Compressor watches are defines by the company which made the cases and held a patent for their design. These cases were made by the specialist manufacturer Ervin Piquerez S.A. of Switzerland. No Japanese manufacturer used EPSA Compressor cases. Information about Compressor cases is not hard to find. The link below shows the three types of Compressor case, including the Super Compressor from which your Citizen watches are inspired. True Super Compressors are typically identified by a crossed hatched design on the crowns, a diver helmet logo on the case back or inside the case back, but always, they have the brevet (patent) number on or inside the case back. http://wornandwound.com/2014/03/24/guide-super-compressors/”

NOS means New Old Stock – a watch that was not worn and it is in excelent condition after all this time (45 years old).

citizen compressor diver seven star parawater

Just like the other compressor diver I have presented here : https://vintagecitizenwatches.com/2014/01/18/vintage-citizen-compressor-diver-4-520343-y/, this one is also made in 1969. By contrast, this one has a more classy, elegant appearance.

The case is large, made in polished stainless steel, with a brushed frontal surface. Looking at it from the side, the case seams slender, thick in the middle, and arching down all the way to the end of the integrated lugs. The mineral crystal is slightly domed in order to be better integrated in the overall design. The crystal is secured by a thin, polished, elegant bezel. The sides and the frontal surface are well delimitated by a carefully made polished chamfer. The twin crowns are not signed. One of then, the upper one, turns the bidirectional internal bezel and the other one is connected to the movement. The case-back displays the usual information – material, date of manufacture, model, movement, and parawater. Read about parawater here: https://vintagecitizenwatches.com/2013/12/26/citizen-parawater-citizen-parashock/

The dial is dark-deep black,  very simple but not simplistic at all. Under magnification one can see that a lot of attention was placed into details. The writing is white, also on the black date and the black day wheels. The date is on 3 o clock inside a polished frame and the day is at 9 inside an oval, carefully made window. The only tint of color is the lettering for Sunday.  The inner rotating bezel is also black with white writing. The hour markers are applied with luminous material in the center. The hands are also polished, faceted with luminous material as well.

Citizen diver Seven Star 4-520017Y

The movement is the usual automatic Citizen calibre 5270, with 21 jewels. The calibre number is engraved, as usual, under the balance wheel.  It is winded by a black rotor that compliments the dial on the other side in a fortunate manner.  It is a common movement used in a variety of models, not only divers making it rather easy to repair with available parts. It is reliable and offers hand winding possibility. The date changes in the second position of the winding crown (first position for winding, third for time setting) but the day changes only by passing midnight with the hands. The corespondent crown for the movement is the one at 4 o ‘clock.

The bracelet is nothing less than a piece of art. I think this is my favorite Citizen design. It is made in solid steel, three thin polished connectors and  brushed large links. It doesn’t get better than this! It has a pleasant tactile feel and a nice weight. One more thing that can not be described into words is the sound of the links touching each other… pure music. The clasp is the usual type, signed Citizen.

Citizen compressor diver - Seven Star 4-520017Y

Al things considered, this is the best diver for a gentleman, ready to be worn at the beach or with a suit during a corporate meeting. Decent water resistance (nor really made for submerging, but good enough for daily jobs) and understated elegance placed together for one of the best Vintage Citizen All-rounder.

Read more about Citizen diving watches here: https://vintagecitizenwatches.com/diver-vcw/

by

Seven Star Citizen 100m diver 67-5776, APSS-52904 Y


This was one of the last years (1971) that Citizen used the term “parawater”. Unfortunately it came to an end and this particular model was one of the last parawater divers. It marked the end on an era. What can I say, I just love this Seven Star – Vintage Citizen Diver!

citizen diver 67-5776It was made in four dial color variations: black, blue, silver and orange, my favorite is the orange. This era was so colorful and full of life and it is also true when speaking of Citizen watches.

Update 2018 April:

Kim, aka WVE from The Seiko and Citizen watch forum, was king enough to let me use his pic so you can enjoy them. Thanks Kim, lovely collection you have there! 😉 Blue, Silver, Orange and Black dial!

The case is the well known Citizen cushion shape having a diameter of 44 mm without the crown. It is made in stainless steel and so is the caseback and the bidirectional frictional type bezel. The bezel insert is aluminum? painted black with white numbers and markers. At 12 there is a luminous dot inside an upside down triangle. The entire case is polished, except for the frontal surface that has a circular brushed finish. The acrylic crystal is raised and flat. I love the way the light  bounces back from underneath an acrylic crystal! The water resistance is 100m, maybe because the signed CTZ crown is a non screw in type. But… 100m is plenty for normal use.

blue dial citizen diver 67-5776

The dial is made from two distinct pieces, glued together; an outer ring is sitting higher than the dial itself and has hourly numerals from 13 to 24. A silver ring delimitates the two surfaces and has minute markers. The lower part has raised polished hour markers with luminous material. The spade shape hands have luminous centers as well. By contrast, the second hand is simple, entirely polished. At 3 o’clock the watch has the day and date display inside a polished frame that connects the two parts of the dial. The usual Citizen logo is at 12 and at 6 it reads: “para 100m water, automatic, 21 jewels”.

citizen 7270 automatic 21 jewels

The movement is the 7270 calibre – simple, reliable, automatic with 21 jewels and beating at 21,600bph. As usual with Citizen, the automatic movement can be hand winded. It has jewel bearings for barrel and a power reserve of 41 hours. It features a quick set date and the day changes from advancing from 20 to 0:30. The sweeping second hand doesn’t hack.

The bracelet is a common Citizen design called bead of rice that fits the case shape really nice. I have seen other designs (see the cool one on my NOS APSS-52904 Y below) but a lot watches found today have nato replacements or rubber straps. Certain leather straps look good on it too. It is easy to find a bracelet or a strap because it has 20mm between the lugs and a look that makes it easy to wear on anything.  

vintage citizen 100m 67-5776

Update 2018 April:

It seems that the models above are export models since the domestic ones, for Japan market, are marked “Seven Star APSS-52904 Y” and have a slightly different dial. I managed to find a NOS one and here it is, also side by side with the orange export version. The case back is also different, and so is the winding crown. Take a look. UPDATE to the info above from my fellow collector Stephen: It seems the APSS52904Y would be found in the slightly earlier 61-5773 which uses the 52 movement. That model also uses a different, smaller crown.

And side by side:

Conclusion: Beautiful watch, warm, colorful and full of life.  One of the last “parawater” divers made. A real joy to wear and look at.

Read about other Citizen divers here: https://vintagecitizenwatches.com/diver-vcw/

Read about “Parawater” here: https://vintagecitizenwatches.com/2013/12/26/citizen-parawater-citizen-parashock/

by

Looking for the “Holly Grail” watch


What’s that The “Grail” watch? 

The holly grail watch

Well… it is the watch that rumor has it that exists but can not be found. You look for it years after years and from time to time you think you find it, but than you realize it was not THE one, but only some pale imitation. You look for it again and again and again. Sometimes you dream about it, sometimes you think you see it strapped to someones wrist but time after time you find out it was just a mind trick. Your eyes see only what your mind fantasizes about.

One glorious night, after hours on web searches, you find a post with pictures attached to a post in a language you don’t understand. That is the real watch! It exists!

Your heart stops; than it races like crazy! With trembling fingers you press the keys on your laptop and start writing a message to the user that posted the pictures, hoping for an answer…

Maybe… Maybe… Should you allow your heart to hope for an answer?

(feb 2014) Let us pray for THE Holly Grail!

UPDATE (oct 2014) I found not one but two owners of this model. One owner doesn’t sell it (yet) and I am still waiting for an answer from the second one. I hope he still has it and will sell it to me. 🙂 Well.. he is not selling it. 😦 The search is still on.

UPDATE (jan 2015) The wait is long, too long! Is it fate? Is it a coincidence? I have to wait! Meanwhile I found out that the two watches I told you about in Oct are not 100% original. Both of them have aftermarket bezels and bezel inserts, and one has a non original crown too. They don’t have the original strap. (one does actually) The closer I get the longer and more difficult the wait gets! It’s been one year since I wrote this article and I feel…

UPDATE (feb 2015) The hunt is over! I have it in my hands! Tired and extremely happy! Read abut THE Citizen HERE!

Thank you all! 🙂

 

 

by

Citizen Leopard 36000 pocket watch 67-2192


The first pocket watch presented here, a rare (never seen another one and my searches lead me nowhere) Citizen Leopard.

This is not only extremely rare but very interesting too.

Citizen Leopard pocket watch 67-2192First of all it is a pocket watch. Citizen had a lot of pocket watches but why is this so special? Well, because it is a Leopard – the hi-beat range – 36000 bph. Also, very interesting, it is an automatic! Why is it an automatic, I don’t know, it doesn’t make a lot of sense because as a pocket watch it doesn’t get enough movement to wind up. Nevertheless, a beautiful movement that is a joy to look at.  The case seems to be mirror polished stainless steel but I see no references to the material . It is not large but rather small, the same as a wrist watch. There is also a nice chain that compliments it really nice. Both sides have a thick mineral crystal that sit high above the case. Beautiful design! As for the crown, is signed, as usual, “CTZ”.

The beautiful hi-beat parashock Citizen calibre 7230, running at 36000 bph can be admired because the watch has a see through back crystal. In fact the watch face has the same crystal shape and size as the back, so the same importance was given to displaying the movement as it was given to the dial part. This says something about this movement. It has 28 jewels, it has a sweeping central second hand that hacks, it can be winded by hand also and has a quickset date feature.

citizen leopard 7230C_0048 copy

Here is a scan of the movement from a vintage Citizen book to better understand the beautiful movement.

Citizen leopard calibre 7200 36000

One of the nicest feature of the back (apart the movement and the crystal) is actually the metallic blue ring that has printed: Automatic Citizen 67-2192 OR-D-1 (or is it OR-D-i ?) 4-721811 . Not too much information unfortunately. If someone knows more about this magnificent piece, please let me know!

The dial is simple silver, with delicate vertical brushed lines. The hour markers are applied with black  painted center. They share the same design as the hands. Only the sweeping hand is bright orange to accentuate the hi-beat movement. It has a wonderful sweeping motion, almost gliding above the dial. The Citizen logo is applied too.  The day and date are located at 3 o’clock, inside a window, both having it’s own frame.

citizen leopard 36000Conclusion: A rare elusive watch, beautiful to operate, listen to and look at. It has a wonderful design with an orange accent on the face (the second hand) and a bright metallic blue on the back (the ring).

Check out the video here:

https://vintagecitizenwatches.com/2014/01/28/video-citizen-leopard-pocket-watch-67-2192/

Here is the elegant wrist watch version with the same movement:

https://vintagecitizenwatches.com/2014/11/22/citizen-leopard-36000/

Enjoy!

UPDATE:

I found its pair, the Citizen Seven Star Deluxe pocket watch, so you can see them side by side HERE.

by

VCW Facebook group page


Facebook is a great place to meat great people with really great watches. 🙂 This is why we have created the Vintage Citizen Watches official group page. Check it out and add yourself and your friends! Here it is: https://www.facebook.com/groups/vintagecitizenwatches/354822734656228/?comment_id=354922047979630&notif_t=like citizen facebookThank you for looking!

by

Citizen automatic diver 51-2273


Another vintage diver is the model 51-2273.

This one is  more recent than the previously featured watches here.

citizen diver 51-2273One of the main feature about this one, compared with the others, is the unidirectional rotating bezel. Also, the “Mercedes” hands are gone and are replaced with a different style.

The case is made in stainless steel,  with a brushed (circular) front surface and polished sides. The case back screws in and it is polished too. This case features crown guards for protecting the crown, a nice diving detail that enhances the “tool watch” appearance. Another diving feature in the screw in crown and the unidirectional bezel. This time the bezel has 60 solid clicks and rotates only counter clock wise. On 12 it has a triangle with a luminous dot. Every 10 minutes are marked with numbers and every minute by lines. The overall size is perfect, at 40 mm diameters without the crown and 20 mm between lugs.  The mineral crystal is flat.

The dial is mate black without any reflections. The hour markers are dots or lines, depending on the position. They are filed with luminous material. The hands are also luminous and they have a distinct shape, more geometrical, that I think enhance the overall look of the watch. On 12 there is the applied Citizen logo and “automatic”; on 6 there is the writing: “21 jewels – water resistant – 150 M ” On 3 there is the day-date window, in a single frame. The day is bilingual with red “Sunday” while rest are black.

citizen diver 51-2273The movement is the well known automatic Citizen calibre 8200A (Miyota). It has 21 jewels and offers a hand winding capability. First position of the crown wind the watch, the second will change the day and the date (in different directions) and the third will set the time. It beats at 21,600 bph and has a power reserve of 43 hours. The rotor will wind the watch in one direction only. Nothing fancy about this, just a reliable, simple movement that is doing it’s job as it should.

The strap on this watch is a rubber one with a stainless steel clasp. Rubber fits it very well and next to the nato straps it is the best option for this model.  The width at the lugs is 20mm so plenty of strap options are available at this size.

citizen diver 51-2273 Miyota 8200AConclusion: A nice diver  that has all the features of a real diver: unidirectional 60 clicks bezel, easy to read, mate dial with clear hour markers and hands, a sweeping central second hand, screw in crown protected by crown guards, a reliable simple automatic movement and a long rubber strap. A real tool watch!

by

Vintage aviator Citizen 51-1811


A true “tool” watch for pilots, this is the automatic Citizen 51-1811. 

The inner rotating bezel (slide rule) is very useful for all types of calculations. The interesting thing about this watch is that it was used for its original purpose, as an aviator watch.

Citizen aviator 51-1811

The case is really large at about 42 mm without the crowns. It is made entirely in stainless steel. The front surface of the case is brushed with a circular grain, and the rest is polished. There is an interesting blue light reflecting all the time from the brushed finish, giving it a satinated feel. The winding crown is located at 3 and the one at 2 is for adjusting the inner bezel. The crowns are not signed. The ring bezel holding the large, flat (35mm) mineral crystal is polished too. As pictured, the case integrates the lugs and the twin crowns, protecting them.

The dial is the main attraction of the watch. It is grey, with a sunburst effect. On the outside there is a golden ring with black digits. The golden ring is circled by a thin red zone delimitating the dial from the golden rotating bezel. The entire face of the watch is shiny and powerful. On the grey zone there is the applied Citizen logo, the white painted lettering “automatic 21 jewels”, the day and the date (sharing a single golden frame) and the applied luminous hour markers.  The hands are painted, partially, in black with a luminous line. The sweeping second hand is not painted.

The slide rule is the name of this type of internal bezel. How does it work?  In a few words it is used for multiplication, division, distance and volume conversions, time calculations and percentages.

Pilot aviator Citizen

The movement is the well known 8200A Citizen calibre. It is an automatic movement (it can be also hand winded) beating at 21600 bph with a quickset day and date. It has a unidirectional winding rotor and 21 jewels. Nothing fancy, just an usual Citizen “workhorse”. It has a power reserve of about 44 hours.

The bracelet is a stainless steel one, with a polished center and brushed sides. It compliments the overall shinny design of the watch nicely. It has folded “H” shaped links and a signed “Citizen” clasp. As usual, very comfortable.

RAF aviation watch RAF Citizen

The PAF engraving (and the up pointing arrow) suggest it was in use by the air force and it seams that this was the Pakistan Air Force. So that makes it a tool watch, used for what it was meant to be used.  Just a nice, interesting touch.

by

VIDEO – Citizen automatic chronograph 67-9631 cal. 8100A


This is one of the two vintage automatic chronograph movements made by Citizen, the other is the Citizen 8110A calibre that features an extra 12 hours counter.

A video of 8110A is here:

https://vintagecitizenwatches.com/2014/01/13/video-citizen-bullhead-chronograph-model-67-9356-2/

And here is the video for 67-9631, calibre 8100A. You can see the start-stop-reset mechanism in function, as well as the fly back. Also you can see the way you can change the date and the day. Enjoy!

More informations about this watch here:

https://vintagecitizenwatches.com/2014/01/05/citizen-automatic-chronograph-67-9631/